Bicycle Mechanics - Can you use cable disc levers w/ V brakes?
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
02-22-07, 09:49 AM
So I know I should know this, but I don't... Yesterday I took the day off and was playing around in the garage. I decided that I had enough spare parts to build a complete bike, five hours later I had two completes a geared and an ss. The frames are older and have canti mounts, so I can't use disc's in the rear. I know you can't use canti levers w/ v-brakes, but I was wondering if cable pull disc levers had a similar cable pull ratio to V-levers? Specifically can use use Hayes MX-2 levers w/ Avid Single Digit brakes? Thanks
02-22-07, 03:09 PM
Every Modern disc brake I've run into uses the same pull as V-brakes. This includes the Hayes MX2s.
In short, yes, your proposed combination will work great.
02-22-07, 04:26 PM
Thank you very much. I thought they would work, but I just wasn't sure
Powered by vBulletin® Version 4.1.12 Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.