branmu
05-21-03, 04:12 PM
I had a woobly wheel a while back and fixed it with your advice, but it has returned and I need some more advise. I think I have discovered the problem on the rear wheel the piece that holds the bearings in opposite the crank (sorry I dont know the name for it) its a circular piece, but its slightly bent at the top I think this is causeing the bearings to jam which force the piece to spin and makes the wheel wobble. If you understood that do you think thats whats causing it?
Now if that is the case I need advise on procceding from there. Could I just buy a replacement for that peice or will I need a whole new axel set as was mentioned before. Also, a whole new wheel was mentioned as remedy, but if that is the problem a new wheel would not be the way to go right? Also should I replace it myself or have the LBS do it?
Thanks for your help.
Now if that is the case I need advise on procceding from there. Could I just buy a replacement for that peice or will I need a whole new axel set as was mentioned before. Also, a whole new wheel was mentioned as remedy, but if that is the problem a new wheel would not be the way to go right? Also should I replace it myself or have the LBS do it?
Thanks for your help.
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.