FOG
05-22-03, 09:08 AM
I have done a very small amount of welding, and would also like to know a little about how to braze or silver solder a frame. Any links to guidance or classes?
Bicycle Mechanics - Learning to Braze or Silver solder
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.View Full Version : Learning to Braze or Silver solder
lotek
05-22-03, 09:32 AM
I'd suggest you join the Framebuilders list
(framebuilders@phred.org).
Some good info there input by some of the biggies
in lugged frames llike Richard Sachs, Joe Starck, Kirk Pacenti,
Fred Parr.
From what I see they also get more than a few newbies
you can subscribe at:
http://www.phred.org/mailman/listinfo/framebuilders
Marty
(framebuilders@phred.org).
Some good info there input by some of the biggies
in lugged frames llike Richard Sachs, Joe Starck, Kirk Pacenti,
Fred Parr.
From what I see they also get more than a few newbies
you can subscribe at:
http://www.phred.org/mailman/listinfo/framebuilders
Marty
Rev.Chuck
05-22-03, 01:52 PM
Go to your local, tech school. A lot of them offer courses in welding. They will teach brazing, stick weld, mig, tig, and all the background info you need as well. Plus a place to do it, the right safety equipment(burning your eyes is something you don't want to do twice.) and stock to stick together.