Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.Juha
06-02-03, 03:01 AM
I have a Sigma BC800 with a wireless setup. The thing stopped logging any info during my last weekend ride. I did not crash or drop the comp (it has been dropped before, though, and then one of the digits stopped displaying for good). I just went for a break, took the comp with me, came back, clicked it in and the stupid thing would not work.
At first I thought the magnet was too far from the transmitter part in the fork. Nope. Then I checked batteries, from both the transmitter and receiver with the test mode. Both work ok (transmitter notices the magnet as it passes by; and receiver registers the transmitter's signal). But none of this gets recorded in the computer.
There is nothing visibly wrong with comp's connections and once the comp is in place, it fits snugly. There is no noticeable play. The computer reacts to buttons normally. In short, everything appears to be in perfect order, except none of my kilometreage gets logged in :crash: .
Any ideas?
--J
At first I thought the magnet was too far from the transmitter part in the fork. Nope. Then I checked batteries, from both the transmitter and receiver with the test mode. Both work ok (transmitter notices the magnet as it passes by; and receiver registers the transmitter's signal). But none of this gets recorded in the computer.
There is nothing visibly wrong with comp's connections and once the comp is in place, it fits snugly. There is no noticeable play. The computer reacts to buttons normally. In short, everything appears to be in perfect order, except none of my kilometreage gets logged in :crash: .
Any ideas?
--J