Bicycle Mechanics - Removing brifters question
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
04-23-07, 11:40 AM
I have Ultegra Flight Deck brifters and don't know how to remove them. (I'm swapping my handlebars.) Any advice?
Looks like the rubbery thing flaps up and there's a plastic square on the inside with two philips screws.
04-23-07, 11:47 AM
No. The clamp bolts are located to the outside faces of the bodies under the rubber hoods. You will see a groove in the body leading under the rubber. Follow the groove with a 5 mm hex wrench and unscrew the bolts to loosen the bodies.
04-23-07, 12:26 PM
Thank you HillRider!
04-23-07, 06:27 PM
Glad to help.
Powered by vBulletin® Version 4.1.12 Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.