Bicycle Mechanics - Middle Chainring Auto-Shifting Problem
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
04-26-07, 04:42 PM
I have a 1984 Specialized Expedition. I have set it up with more modern parts. Everything is close to running well now except when I am on the middle chainring(36T) and the largest cog in the rear (30T), the chain has a tendency, or inclination to move to the small chainring. It rarely actually makes the jump, but the chain keeps getting out of the middle chainring moving toward the small chain ring. It seems to only to have this problem when on this gear combination. The cassette is new, SRAM 12-30 8-speed, and the front is an older sugino AT triple crankset.
please shed some light on what might be the cause of this.
04-26-07, 05:03 PM
It sounds like your front der is not adjusted correctly. There could be other causes, like a cracked frame, or a worn front der, that let things move that shouldn't.
You did put a new chain on with those new cogs, right?
04-26-07, 06:56 PM
It's pretty much a new chain. And I checked when the auto-shifting takes place on a stand, it's not touching anything.
My Bianchi Bergamo has a single 32-tooth chainring and a 12/32 7-speed cassette. It also wants to shift off the chainring when in the lowest gear. There was a burr or manufacturing defect on the chainring that was making it worse, but even after filing it off and dressing the area it still isn't totally reliable in the lowest gear. The problem seems to be due to a combination of equal sized "sprockets" on both ends and a relatively "crossed" chain. Bianchi deserves some of the blame for using a derailleur type chainwheel in an inappropriate application. I have assumed that a front deraileur used as a chain guide might cure my problem, but it doesn't seem to be helping you.
Might be a chainline problem. Be sure you have the correct bottom bracket and that it is properly torqued.
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.