BMX - identifying bicycle

Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.




View Full Version : identifying bicycle


hydeph
04-30-07, 11:50 AM
Hello all, I'm new and this is my first post. :) Seems like a happening community so I decided to join.

I found this bike in a dumpster, I had assumed it was abandoned and after taking a look at it I decided to take it home and rebuild it, since sitting in a dumpster isn't exactly what it was made to do. That was about ten years ago, I'd say. Anyways, I stripped the frame with furniture stripped and revealed the original colour, black. It had some stickers and other markings on it. "1982" was stamped on the rim, and the head tube had a sticker on it saying 'All-Pro'. On the seat post tube of the frame it had a disclaimer saying this bike wasn't actually made for dirt jumping and you shouldn't really use it for that purpose. Anyways, I've researched this beast before. The original seat it came with had MOTOBIKE written across the side so I google'd that and found a plethora of Yamaha stuff from the late 70's and early 80's.

Here is a rather large picture of the bike.

http://www.hydeph.cs-irc.com/images/bike.jpg

It is very similar to the Yamaha models but they do have some differences.. Can anybody tell me more about this bike? I'm probably going to rebuild it this summer again, this time with new and stronger components.


kjohnnytarr
04-30-07, 11:56 AM
You need to check out the classic and vintage forum for this one. It's some sort of old chopper. Raliegh made one similar to this in response to the introduction of BMX bikes in America, but this looks more Schwinn-like. Yeah, definitely ask at classic and vintage.

http://www.bikeforums.net/forumdisplay.php?f=181

East Hill
04-30-07, 01:00 PM
That's a beast!

Welcome to Bike Forums, by the way!

East Hill


FitRider 921
04-30-07, 01:40 PM
Welcome, and thank you for typing things out correctly (unlike some people here). That is a rather interesting bike, and I have never seen anything like it before. I'm not quite sure anyone here will be able to identify that one for you.

bikerguy45
04-30-07, 01:51 PM
I can't identify the bike but you should paint it and put some new parts on it.

mude
04-30-07, 02:27 PM
Mod Note: Mude, not yet.

eightdip
04-30-07, 02:52 PM
http://www.vintagebmx.com

wethepeople
04-30-07, 05:01 PM
First thing I thought was Yamaha but it has a few differences.

mude
04-30-07, 05:05 PM
the back end is a little different then a yamaha

wethepeople
04-30-07, 05:11 PM
So is the gusset in the front, the seat/sissy bars and stanctions. But it still had the STR frame design.

Also, Yammi's didn't have 1peice cranks to my knowledge or high flange hubs, but I could be wrong.

hydeph
04-30-07, 05:20 PM
Hehe, yeah, I've painted it twice now. The rims used to be chrome, but they were badly pitted so I scuffed them up nicely and gave them 10 coats of that delicious John Deere yellow. It's starting to chip off now, so I'm thinking of getting some nice high spoke low rider style wheels for it. Most of the chrome is badly pitted, especially on the fork tubes. I'd like to find some replacement parts to bring it back to it's former glory but I'm afraid the years of dumpster sitting have taken their toll.

I've painted the frame twice, first navy blue then this metallic green that didn't really turn out too metallic.

Anyways, the current parts on it are junk. I've crashed the bike a couple times disobeying the 'don't jump this bike' sticker and it bent the crank arms and the front cog, so I bent them back as straight as I could. The chain falls off a ton, the hubs and loose and the bearings and shot, but it's still a dandy cruiser and I don't think I'll ever part with it.

Should I go with high end BMX parts? I don't want to spend too much money, I just want it to be a solid dependable bike, which is currently is not. I'm thinking I'll just get new wheels, hubs, spokes and a complete drivetrain and leave the coaster brake on. Thoughts?

cwt341
04-30-07, 06:02 PM
a guy down the street from me had a bike like that.It's a cool bike though

East Hill
04-30-07, 06:05 PM
If it's not a Yamaha, it's an almost direct knock off. Could it be a later version, with the gusset? Stupid question: was that the original saddle?

East Hill

new_dharma
04-30-07, 06:37 PM
Victoria Motocross (w/o the tank)
it's listed on this (http://www.vintagebmx.com/museum_001.htm) page

a neighbor kid had one when I was growing up...i had a Huffy Monoshock...

wethepeople
04-30-07, 09:10 PM
If it's not a Yamaha, it's an almost direct knock off. Could it be a later version, with the gusset? Stupid question: was that the original saddle?

East Hill

Definatley not a Yamaha, early or late. I have one in my shed.

hydeph
04-30-07, 10:54 PM
WOW new_dharma that is EXACTLY my bike.

The fenders, the tag on the seat post tube, the motocross on the saddle, the black paint. the bike came with two fenders but they were badly damaged so I threw em out. The tank was long gone, as was the number plate. My god, I certainly owe you one! Some things are a bit different, the crank/grips and other junk but whatever, mine's like a hot rod :]

Thanks a ton! That is my bicycle! Mystery solved :D

East Hill
05-01-07, 12:16 AM
Hoorah, and thanks to new_dharma for the win!

WTP, you've got one of those Yamahas in the shed? How does it handle? It looks seriously heavy, and built to withstand a lot of abuse.

East Hill

new_dharma
05-01-07, 01:14 AM
i like vintage bikes...big ones, fat ones, tall ones, short ones...nunchuck skills, bowhunting skills, computer hacking skills... Girls only want boyfriends who have great skills...oops, forgot what I was talking about

wethepeople
05-01-07, 01:29 AM
Hoorah, and thanks to new_dharma for the win!

WTP, you've got one of those Yamahas in the shed? How does it handle? It looks seriously heavy, and built to withstand a lot of abuse.

East Hill

Handles like a tractor, big, slow and almost 70lbs.

new_dharma
05-01-07, 02:25 AM
Hoorah, and thanks to new_dharma for the win!

WTP, you've got one of those Yamahas in the shed? How does it handle? It looks seriously heavy, and built to withstand a lot of abuse.

East Hill

Handles like a tractor, big, slow and almost 70lbs.

Yamaha Delevelopment Guy 1: Maybe we should make a BMX bicycle.
Yamaha Delevelopment Guy 2: Bicycle? But we make motorcycles.
Yamaha Delevelopment Guy 1: Yea, but look at the market...parent won't buy the kid a motorcycle, but WILL buy a bicycle.
Yamaha Delevelopment Guy 2: But what do WE know about bicycles?
Yamaha Delevelopment Guy 1: Nothing...lets use a motorcycle frame and suspension, because every kid WANTS suspension for that true motorcycle feel, and modify it! Add some pedals, and we are good to go!
Yamaha Delevelopment Guy 2: That sound like a swell idea!

...hence the 70# frame!

...or something like that

East Hill
05-01-07, 03:44 AM
^^^^^
That's hilarious. 70 pounds? I can just see the conversations, just as new_dharma laid out...

East Hill