BMX - Before & after (GT Perfomer)

http://a8.cpimg.com/image/58/B0/19639128-d4a0-01D3015E-.jpg

http://a7.cpimg.com/image/1B/9D/19971867-4ca8-028001AC-.jpg

The first step is done.

Chad

nice...

why did u ruin it, thats the WORST thing you could have done, but its your bike...:(

Originally posted by King Cruizer
why did u ruin it, thats the WORST thing you could have done, but its your bike...:(

no it's not. he could have cut the top tube off and used it for a seat post for a morales frame, like i did.....:)

uhhh. I don't get it, how did he ruin it?

Cruize I understand there is some "perceivd" value if I kept it orginal, but than I would have an orginal GT Performer that was ugly and rusting away. This way I got a modified bike that is not rusting and I will be able to enjoy. All I did was take a $26 frame and make it look good. If this was a vintage mustang or an orginal first run Vette, yeah I might keep that orginal.

But hey I still enjoy your input.

Chad

the frame will still hold it's value if you don't break it first. we used to joke the GT stood for Gone Tomorrow because the broke so fast.

if someone decides they want to restore that frame, they would have repainted it anyways and got a new sticker pack for it.

so you didn't really ruin it.

enjoy it while you got it.

At one time I had thought about putting a high end crank into it, but I think for now I will just go with a forged one piece crank, just to get me up and running. May change later to a 3-piece.

What size do you recomened? I'm thinking about a 43 teeth crank.

Chad

Went back to the shop where I bought the frame and he had the orginal crank set he let me have for $20, so that is what I will put in for now.

Chad

New images with the crank painted and the bars installed. This is the orginal crank and the bars are mongoose bars. I can always upgrade later.

http://a4.cpimg.com/image/EC/D6/20346604-4b04-028001AC-.jpg

Chad

when do you plan on riding the thing?

LOL I know it seems like I'm taking forever to finish, but I have to siphon money out of my boat fund to work on this project. I hope to be riding in 2-3 weeks.

Chad

Here is a photo of the completed bike. Finished last night.

http://a2.cpimg.com/image/C8/61/20803272-50e4-028001AC-.jpg


Chad

Very nice..i have a 2000 performer, chrome..feel like painting that for me? :-D

i think you should have put a custom paint job on that bike now dont get me wrong it looks nice but you sometimes want puctures but the bike looks nice

Thanks for the compliments. This was my first experiance at painting a bike so I didn't feel comfortable doing a more custom job.

Chad

How's the paint holding out? Does it seem like it's gonna chip easily or . . . ?

So far so good. I sanded it down real well and than put on a good coat of primer. That was than followed by several layers of paint and than several layers of clear coat. I hope it holds up good.

Chad

nice ride so far, but to REALLY finish it, u need to original stickies for it! :beer:

Make some original stickers.. like Chad Vert or something :) Would look absolutely grand, running up one of the bars..

I like that idea. Where can you get custom stickers? I think I would like to get a sitcker that says "Eat Dirt"

Chad

Try these sites for your custom stickers:

http://www.websticker.com/
http://www.123stickers.com/
http://www.allaboutstickers.com/

Good luck Chad :)

how old is that frame? it looks old.the before picture

I figure that it is about an '87 GT Performer.

Chad

chad did you put clear coat on the bike after you painted it if not it will chip easy.

It has about 6 or 7 layers of paint and about 3 or 4 layers of clear coat. Haven't had any problems with paint chipping yet.

Chad