Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.cudak888
05-15-07, 06:46 PM
Hello!
I'm working on lengthening (or rather, torching out and replacing) the steerer tube on a steel Guerciotti fork I am adapting to fit into a 60cm, 1978 Guerciotti I am restoring. The fork I have has a steerer about an inch too short, hence the new steerer tube.
Although I have read up quite a bit on framebuilding, I am not too familiar with the suppliers of frame components. Would anyone here be able to recommend a supplier for 1" threaded (Italian or English) steerer tubes?
Thanks a bunch!
Take care,
-Kurt
I'm working on lengthening (or rather, torching out and replacing) the steerer tube on a steel Guerciotti fork I am adapting to fit into a 60cm, 1978 Guerciotti I am restoring. The fork I have has a steerer about an inch too short, hence the new steerer tube.
Although I have read up quite a bit on framebuilding, I am not too familiar with the suppliers of frame components. Would anyone here be able to recommend a supplier for 1" threaded (Italian or English) steerer tubes?
Thanks a bunch!
Take care,
-Kurt