Bicycle Mechanics - Super Link III for Campy 5.9

Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.




View Full Version : Super Link III for Campy 5.9


greenmtn
05-22-07, 12:06 PM
I am using the super link III with a Campy Record hollow pin 5.9 chain I am getting a intermitent "click" which I can feel through the pedal, anyone else experiencing this? My former 6.1 record chain and Wipperman link was perfect. Will a Wipperman link for a Shimano chain work with the 5.9 Campy chain??


Wil Davis
05-22-07, 12:29 PM
Wippermann make a smaller link for the 5.9mm chains. There was a thread (which included a link to a source), about it on BF recently.

- Wil

HillRider
05-22-07, 07:01 PM
Superlinks often cause a click after a relatively small amount of use. I had one on an 8-speed Shimano chain and it started to click after about 1000 miles. Others have reported similar problems. The Conex link on my 10X1 (Campy 10-speed) Wipperman chain is quiet after 3500 miles.


rmac
05-22-07, 07:16 PM
I am using the super link III with a Campy Record hollow pin 5.9 chain I am getting a intermitent "click" which I can feel through the pedal, anyone else experiencing this? My former 6.1 record chain and Wipperman link was perfect. Will a Wipperman link for a Shimano chain work with the 5.9 Campy chain??

I think you need a Superlink IV with a 5.9 chain. "Model IV fits 5.9mm Record, Chorus, and Veloce, and SRAM PC1090R, PC1090, PC1070 5.95mm chains." I never had one that clicked. The last Wipperman link I had broke after about 500 miles. I like their chains but will throw away the link.

rodrigaj
05-22-07, 08:19 PM
I've got the superlink IV with a 5.9 chain and it clicks with my chorus drive.

I'm getting the campy link. Everytime I try to go with 3rd party solutions on campy gear I am disappointed.

Surferbruce
05-22-07, 08:51 PM
Everytime I try to go with 3rd party solutions on campy gear I am disappointed.
i'm slowly learning that lesson myself. campy likes campy, thats what my mechanic says.

greenmtn
05-23-07, 04:04 AM
thanks for the replys, my link is the model 4 with a record ultra narrow chain. Has anyone tried the wipperman link for shimano?

Nessism
05-23-07, 07:39 AM
Wipperman link for narrow 10 speed is double the price of old style 10 speed link and 3-4 times the price of a 9 speed link. What's up with that?? Really pisses me off.

For the record I'm using a wide Campy 10 speed link (6.2mm) on my Shimano 10 speed chain. Works fine except link hits the large chainring when using the small ring in front and the two smallest cogs in the rear (which is something I try not to do). I want to use the new narrow link but the cost puts me off since it's a clear case of extortion in my view.

rodrigaj
05-24-07, 05:27 PM
I want to use the new narrow link but the cost puts me off since it's a clear case of extortion in my view.

Whether you consider it extortion depends on how you want your drivetrain to behave. If you don't mind the click that you feel every now and then, then the super link IV is a good alternative.

Personally, the click drives me crazy and I've ordered the campy link for $20. Actually it is more than a link. It is actually 4 chain links with 2 pins. It really is worth the 20 bucks to have a perfectly operating drivetrain.

A close inspection of the campy ultra narrow chain reveals an unbelievably fine piece of workmanship, which I think is ultimately worth the price.