PDA

View Full Version : A Free Shirt Graphic: Share The Road




Tom Stormcrowe
05-29-07, 09:09 AM
Feel free to save it and have it silk screened or Heat Transferred to a High Vis Jersey or shirt. My compliments. I removed the old one, here's the replacement!

http://i122.photobucket.com/albums/o260/TomStormcrowe/ROADLEGAL.png

Edited to remove the horrible version!
sbhikes
05-29-07, 11:56 AM
Aaaaack! My eyes! My eyes!
Tom Stormcrowe
05-29-07, 11:57 AM
Aaaaack! My eyes! My eyes!
I'm going to change it to something a little less busy!
JumboRider
05-29-07, 12:03 PM
What Tom? I can't hear you because you just blinded me.
randya
05-29-07, 12:16 PM
put that on a tee shirt and motorists are going to crash into you trying to read it....:eek:
Tom Stormcrowe
05-29-07, 12:21 PM
put that on a tee shirt and motorists are going to crash into you trying to read it....:eek:
Fixed, see the original post, new version!
JumboRider
05-29-07, 01:37 PM
Why Jimmy, it's a miracle. I can see again.
Niles H.
05-30-07, 02:39 PM
Thanks for doing this.:)

***
(Perhaps can it be made easier to go to the final product? -- some easy instructions or pathways for applying to fabrics?)

***
Also, it seems that different people lean toward different messages. Some like 'share the road'; other people might prefer to wear something else.

Why not facilitate their own choices too? (maybe have a way or an option for them to insert their own words? or symbols?)
rickyaustin
05-30-07, 02:58 PM
A vector version or higher resolution image may help if someone were to print this any larger than a few inches.

Right now it is 800x600 pixels - or 2.67x2 inches @ 300dpi (standard printing).

I dont know your background, so if I am telling you something you already know - it is not out of disrespect :)

Let me know if you have a question. I'm a designer-guy :)
Tom Stormcrowe
05-30-07, 05:21 PM
A vector version or higher resolution image may help if someone were to print this any larger than a few inches.

Right now it is 800x600 pixels - or 2.67x2 inches @ 300dpi (standard printing).

I dont know your background, so if I am telling you something you already know - it is not out of disrespect :)

Let me know if you have a question. I'm a designer-guy :)
No disrespect felt, I just don't have vector available right now. It's a PNG in it's current form, was a jpeg. ;)

If you want to put up a Vector version of it, that'd be very nice! All I have for Graphics is GIMP.

Niles, if anyone wants to mod it and put their own words/message in, that's fine with me.....

It's a PNG, as I said and the background is a transparency., Just use select and cut out the text below the sign and insert new text in a new layer.