BMX - Mini handlebars, need to use 1" threaded stem
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
06-17-07, 09:35 AM
How do I make this work?
06-17-07, 09:36 AM
The bars should fit.
Explain further the scenario.
06-17-07, 09:39 AM
As I understand it the clamping area on 1" threaded BMX stems is also 1", while mini bars are 7/8", or there abouts. Basically I know I would have to shim it, but I was also wondering if anyone knew of a 1" threaded stem with a 7/8" clamping area.
Or, I could just totally be wrong...
Pretty much every BMX stem is a 7/8" clamping area. Any BMX stem requiring a 1" clamp area would be an oddity. And most likely NOT a 1" shafted stem.
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.