BMX - It's been done before but i'm a rule breaker.

Dream Bikes?

Frame: Colony Bloody Oath (2008 Nick Richardson)
Fork: Sunday Morning 2
Bars: Slam XLT
Wheel Front: Proper Hub, DT Spokes, Fly rim, Fly Rueben tire
Wheel Rear: KHE Reverse Freecoaster, DT Spokes Balance 7000 rim, KHE tire
Crankset:KHE Hindenburg
Stem: Shadow Attack
Sprocket:Tree Lite
Chain: KHE halflink
Pedals: Wellgo MG1
Seat: Macneil SL White
Seat Post: Macneil Stump
Seat Clamp: Animal
Grips: Animal Edwin
Brakes: Pfft

That's an extremely light bike.

post a link to the frame

Frame: S&M L.A.F
Headset: Kink Integrated [I changed this due to my stupidity]
Forks: Sunday Night 2
Bars: Slams XLT
Grips: ODI
Stem: Redneck XLT
Tire: Front - Ruben. Back - Odyssey Dirt Path
Rear Rim: Kinetik's same setup, profile mini ss, 7k-A
Pedals: Odyssey Jim C's
Crank: Fly
Bottom Bracket: Mutiny mid BB
Chain Wheel: Tree Lite
Chain: Shadow Interlock
Seat: Macneil Pivotal
Post: Macneil Pivital
Seat Post Clamp: S&M XLT
Brakes: Fly, linear cable, small monolever

This should look familiar[sp?]...

fedral art you buildng that bike

Yes, it's also my dream bike. .."This should look familiar[sp?]"..

Dream bike….


Frame: FBM Joint or FBM Deployer (Green)
Fork: Odyssey Classic Race (Black)
Bars: Kink Badgers (Black)
Bar Ends: Par ends (Black)
Stem: Odyssey Elementary (Black)
Cranks: Odyssey Wombolt Mid bb (Black)
Sprocket: Odyssey MDS 28 or 30 (Black w/ Sprayed White Spoked Section)
Chain: KMC 710 SL
Pegs: Plegs (Black)
Seat: Kink Pivitol (Black)
Seat post: Kink Stump (Black)
Seat Clamp: FBM Hose Clamp (Black)
Headset: FSA Impact (Black)
Grips: ODI Longneck ST (Black)
Pedals: Odyssey Magnesium JC’s (Black)
Rim Front: Odyssey 7-ka (Black)
Rim Rear: G-sport Ribcage (Black)
Spokes: DT Swiss Sprayed White
Hub Rear: Odyssey Cassette w/ 10t Driver (Black)
Hub Front: G-sport Marmosette w/ 17 mm bolts (Black)
Tire Front: Odyssey Dirt Path, Fly Rueben, ASM
Tire Rear: Odyssey Path, Fly Ruben, ASM

fuzzy that bikes got a lot of black on it

It's got colour where it should, and it would definetly get painted eventually.

why would you buy a brand new bike and then paint it

Obviously I would make a race bike, but I'll be creative and make a street/trails bike or whatever.

Frame: Sputnic Stratocaster V2A(black)
Forks: Drive Lite(red)
Bars: Macneil Silencer(black)
Cranks: Profile Arms and Spindle(black)
Bottom Bracket: Fly Spanish Kit
Sprocket: Tree Lite(red)
Stem: S&M Race XLT(red)
Headset: FSA Pig Sealed
Front Wheel: Primo Hula Hoop 36H(black)
Macneil Front hub 36H(black)
Primo Forged Spokes(red)
Alloy nipples(black)
Back Wheel: Sun City Light(black)
Odyssey Hazard Cassete
Primo Forged Spokes(red)
Alloy nipples(black)
Tires: Odyssey Dirt Path P-Lyte front and back
Grips: ODI Longneck Lock-On
Seat: Macneil SL Pivotal
Seat Post: Macneil Pivotal
Chain: Chrome ACS

why would you buy a brand new bike and then paint it
Maybe he wants his components specific colors that they do not come in initially... Just a thought.

Fuzzy, You wouldn't need to paint it anyhow, 'cause the frame(main part of a bike) is a color.

i guess so FIT but it seems that most parts come in multiple colors but i guess if he wants the certain color then he would have to paint it

is richos frame the one with built in seat clamp? couldnt be bothered searching again.

i can't find the frame on the net yet.

it is about 4lbs, standover is 11.8 i think, head angle 75, seat 71 i think.

there is a catalogue at work ill get some definite specs.

my dream bike is most of my current parts plus a tree spline drive sprocket, trailking pedals, and a new chain. a new frame is debatable.

not bad for a racer mini, i have the sun city lite:)

but if i had a choice of a dream bike

Fit s3 aitken (white)
Demolition lt cranks(white)
Eastern Ultra Light Bars (White)
Eastern Ultra Slim Forks (white)
Fly Ruben Pedals (white)
Tree bar ends tapped
Eastern BB
No Brakes
KMC white chain
Fit down low 23 sprocket
Fit Clear grips
FSA Impact headset
Profile splash hubs 14 mil titanium and 9 tooth titanium driver
purple alloy nipples and gold titanium spokes
ody hazzard rims
Eastern slit pegs white
shadow crow seat lt blue
shadow titanium seat post
snafu gold seat post clamp
fit down low regular stem flat gold
tires glh animal
tubes giant
little devil valve caps
and thats about it

i can't find the frame on the net yet.

it is about 4lbs, standover is 11.8 i think, head angle 75, seat 71 i think.

there is a catalogue at work ill get some definite specs.
Way too light for me. My frame need to be a bit over 5 pounds or I feel I'd destroy it.

It's got colour where it should, and it would definetly get painted eventually.
^^

i can't find the frame on the net yet.

it is about 4lbs, standover is 11.8 i think, head angle 75, seat 71 i think.

there is a catalogue at work ill get some definite specs.

pretty light. id trust it over other frames of the same weight. i wanna get out to byron sometime soon but i cant get a lift with anyone. hopefully come out soon to get some parts.

I'm pretty happy with my bike right now, especially with my new wheel coming in soon. But...


Frame: Solid AA (custom 71 seatube angle, for astetics.)
Fork: Odyssey Race (I have the dirt right now which is fine, but i'd go lighter if i was to build another bike up.)
Bars: Slam XLT (Just the newer versions)
Stem: Redneck LT (The Same one i have now, but maybe some new non rusted bolts)
Headset: Kink (Same one i have now, no problems with it, so it's fine)
Grips: Either ODI or Edwins (I don't care)
Bar Ends: Fly Ruben (Cheap, light, good, low profile.)
Cranks: Profile 175mm (My Primo's are holding up good, but Profiles look better)
BB: Whatever the hell i have in their now, it works fine
Pedals: Wellgo MG-1 or MG-52 (Whatever is cheaper)
Sprocket: Tree Spline drive 30t.
Chain: KMC Drop Buster
F Tire: Aitken
R Tire: Aitken
Rims: Odyssey 7KA back and front.
Spokes: DT or Marwi.
R hub: Profile mini ss 14mm ti axle 11t driver 36h.
F hub: Profile mini 3/8" stud 36h
Brakes: Odyssey Mono2 (Only because i'm being greedy, otherwise my current ones are awesome)
Cable: Nokon (I'd like to try one, just to see what the hype is about, but i'm too broke.)
Seat: Coalition.
Post: Fit alum.

Greeeed.

Cable: Nokon (I'd like to try one, just to see what the hype is about, but i'm too broke.)

Nokon cables look awesome.

the nokon look pretty sweet

theyre too floppy though

theyre too floppy though
True, but i'd still like to try one if i had money to piss away.

mmm me too

Nokon cables are not good. They screw up if you get them too wet

Dream bike

Frame: Fly Tierra (not out yet) Removable brake lugs, (white)
Fork: Macneil I.D (black)
Bars: Slam XLT (black, yes I do have the silver ones but i want a certain color scheme)
Stem: Odyssey Elementary (black)
Headset: Kink
Grips: Either ODI or Edwins (black)
Bar Ends: Animal (black)
Cranks: Fly (black)
BB: Profile (black)
Pedals: Odyssey Jim C's (black)
Sprocket: Tree Spline drive 25t.
Chain: KHE Collapse
F Tire: Ruben
R Tire: Ruben
Rims: Fly back and front. (black)
Spokes: DT.
R hub: Profile mini ss 14mm 9t driver 48h.
F hub: Profile mini 3/8" 36h
Brakes: Etnies Roscoes
Cable: Haha
Seat: The new S&M slim one.
Post: Fit alum.



So thats a white frame with all black parts. I love that look

Frame: Fly Tierra (not out yet) Removable brake lugs, (white)
That thing is so gross looking and low slung. If you run the seat too low, i bet it'll hit the tire!

I'm sure it'll be a nice frame, but it looks ugly.


R hub: Profile mini ss 14mm 9t driver 48h.
The Mini SS doesn't come in 48h, only 36h. You'd have to get the SS.

question. what is spline and what does it do?

That Fly frame with the removable brake lugs sounds so cool. Maybe other companies will start doing it as well as a good amount of BMX riders do not use brakes.

Most companies simply give you the option of their frame comming with or without brake mounts. And if you really care its not like its a big deal to chop some brake mounts off.

Most companies don't give that option- only some. I really like the Subrosa Pandora frame.

my friend just go a white pandora with no brake lug, he put it on a bike with all black parts. It looks amazing.

Dream bike

Frame: ltf
Fork: sunday night
Bars: eastern ti
Stem: Odyssey Elementary (raw)
Headset: Kink
Grips: martinez
Bar Ends: fly
Cranks: hella lights
BB: idk????
Pedals: Odyssey pc's
Sprocket:seawright design
Chain: the kmc color chain
F Tire: Ruben
R Tire: Ruben
Rims: 7ka or g sport
Spokes: double butted
R hub: homer
F hub: coalation
Brakes: harharhar
Cable: none *****
Seat: pivotal.
Post: stump

Most companies don't give that option- only some. I really like the Subrosa Pandora frame.
Alot of companies do now, and more are staring to.

Bars: eastern ti


Titanium! OH EM GEE!

Spline Is What?

Spline Is What?

A spline drive sprocket?

yeah!

It's when you don't need that little hole in the sprocket for the cranks to "hook" onto. The sprocket goes just before the cranks like a washer would. I think.

thats what i thought. i hope so cuz thats cool.

Alot of companies do now, and more are staring to.
One could hope so.

That thing is so gross looking and low slung. If you run the seat too low, i bet it'll hit the tire!

I'm sure it'll be a nice frame, but it looks ugly.


The Mini SS doesn't come in 48h, only 36h. You'd have to get the SS.

I think it looks really nice, I love low slung frames

The brake idea gives me the option of sticking brakes on if i want or maintaining that oh so clean look of lugless frames.

The hub is a dream hub haha. It's what i'd want

Frame: Fit Ed (purple)
Fork: Odyssey Classic Dirt (black)
Bars: Animal Scerbo LT (black)
Bar Ends: Fly Nylon (black)
Stem: S&M XLT (purple)
Cranks: Fly (black)
Sprocket: Tree spline 25t (black?)
Chain: KHE Collapse
Pegs: Plegs (black)
Seat: Macneil Capital (black)
Seat post: Macneil Stump (black)
Seat Clamp: built-in to frame
Headset: FSA Impact (black)
Grips: Animal Edwin (purple)
Pedals: Animal Hamilton (purple)
Rim Front: Odyssey Hazard Light (purple)
Rim Rear: Odyssey Hazard Light (purple)
Spokes: DT Swiss (black)
Hub Rear: Demolition Cassette w/ 9t Driver (black)
Hub Front: G-sport Marmosette w/ 17 mm bolts (black)
Tire Front: ASM
Tire Rear: ASM

thats a nice dream you got there fit.

no one likes my dream bike :(

thats a nice dream you got there fit.
Thank you. It's not really much of a dream bike, it's just the bike that I probably will eventually have. If it were a dream bike, my rear hub would be a Profile and my pedals would be different.

Frame: Superstar LMF (green)
Fork: New Sunday Morning. (white)
Bars: Slams. (white)
Bar Ends: Fly.
Stem: KHE Horst. (black)
Cranks: Fly (white)
Sprocket: Tree spline 25t (white)
Chain: KHE Collapse
Pegs: Plegs (black)
Seat: Aitken (white)
Seat post: 1664 (black)
Seat Clamp: built-in to frame
Headset: Campy, just cuz.... (black)
Grips: Fly (black)
Pedals: sealed JC's, mag (white)
Rim Front: Proper or fly (blue)
Rim Rear: proper or fly (blue)
Spokes: DT Swissm Ti
Hub Rear: Some kinda profile w/ 9t Driver (blue)
Hub Front: Some kinda profile (blue)
Tire Front: Fly
Tire Rear: Fly
Brake lever: A odyssey one that doesn't eat my finger when I ride ramps.
Brakes: Fly.
Line: White with blue stripes Odyssey.

And every little bit of Ti I could get, eat me.

**** Ti