Tandem Cycling - DIY gear cable
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
06-23-07, 11:05 AM
This post is for the vintage buffs that might be using a sturmey/Archer 3 speed.The 3speed shifters used a gear cable with a tube end that slid into the 3speed triger.Universal gear wire with the two different ends(Summit)is avalible--I snipped off the largest of the ends and filed(using a dremel tool)the small end to fit the triger.I used a universal quick release swival to attach the cable to the hub pull chain.I greased the cable and used new housing---simple installment---sam
06-23-07, 03:50 PM
Comes in tandem length (3000mm)?
06-25-07, 04:53 PM
says on the package: gear wire 110m tandem---$2
Powered by vBulletin® Version 4.1.12 Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.