Bicycle Mechanics - Saddle angle
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
When I drop the plumb line, from the top tube, to the center of the BB and then from the nose of the saddle, to the chain stay, I have 23mm, where and how do I apply this measurement ? Thanks for any replys.
06-27-07, 08:09 AM
use a level or angle finder. start off with the saddle level(0 degrees)then adjust to suit.
It means you meet the UCI minimum of 5mm. Go racing!
Not sure how this affects saddle angle though.
Thanks for the replys guys, I thought I was missing something in my bicycle fit for fore and aft.
06-27-07, 08:36 AM
set saddle tilt.
set saddle height.
set fore/aft saddle position.
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.