BMX - 1-piece cranks

Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.



PDA

View Full Version : 1-piece cranks

will radford
08-05-07, 06:10 AM
i have a 1 piece 175mm chrome crank but i bent it but how easy is to to change the fitting to be able to put a 3 piece crank on it?

also do you know where i could find a black 175mm 1 piece crank?

minichamp31
08-05-07, 08:26 AM
It's nothing to put a 3-piece crank on. Go to www.danscomp.com (http://www.danscomp.com) and find some.
live4muzic2
08-05-07, 11:08 AM
you bent this one, if you progress it will end you in some pain. get a three peice.

KinetikBiker
08-05-07, 06:20 PM
Eastern has good cheap 3pc cranks out believe it or not. And i would assume you have an American bb when it comes to getting bearings.
will radford
08-06-07, 03:25 PM
ok thanks
will radford
08-06-07, 03:26 PM
i have a 1 piece crank and i want to get a 3 piece crank but do i have to change anything to put a 3 piece crank on my BMX?
live4muzic2
08-06-07, 10:12 PM
as long as the bearings are unsealed, you will be gewd.
FitRider 921
08-06-07, 10:43 PM
Since when do you actually want unsealed bearing over sealed bearings?
Superbeast69
08-07-07, 07:39 AM
you never do^ it just happens