Southwest - Building Wheels
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
08-07-07, 02:44 AM
Im looking at trying lace my own wheels. i have some old ones i plan on practiceing with but i have been looking at diffrent fixed gear hubs and didnt know what the big diffrence between low flange and highflange. any info whould very helpful
08-07-07, 05:20 PM
The big difference is, you need different length spokes!
Actually, the classic answer was, high-flange hubs made stiffer wheels because spokes were shorter. low-flange hubs were more resilient and rode better.
You need some genuine wheel-building help. I've read a good book on the subject but burned it on an altar and took my mangled wheels to the shop
Powered by vBulletin® Version 4.1.12 Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.