Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.Dizzy
08-17-07, 11:10 PM
The drive side of the cranks has been creaking for sometime. I would crank down on the bolt that holds them on and it would stop for a while. I have recently been unable to make them stop. So, I removed both crank arms and rotated them on the bottom bracket by 90 degrees. I took it for a very short spin and it seemed to fix it. Did i do a bad thing? (they are old shimano 105s from a 8 speed group).
I have a new bottom bracket and a ultegra 9 speed crank I could replace it with but I am saving that for the new bike I am buildinig. I still need a few more part for... :)
I have a new bottom bracket and a ultegra 9 speed crank I could replace it with but I am saving that for the new bike I am buildinig. I still need a few more part for... :)