BMX - Help with pegs?
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
Hey all, I have a 2001 Mirra Flair and I just started picking up riding again, but, I don't think I am going to be doing any tricks anytime soon, I just want to ride it around. So I need to know how to remove my pegs. They are just in the way and since I am not gonna be doin any hardcore street riding anytime soon I don't need the extra weight. So if anyone knows how to remove these pegs, any help would be appreciated:)
07-29-03, 04:43 PM
You'll need a socket that'll fit the wheelnuts (17mm if it's got 10mm axles, probably 21mm or 22mm if you have 14mm axles), a long extension and a ratchet. It couldn't be simpler, just loosen and remove the nuts, slide the pegs off and put the nuts back on. Make sure any washers that were next to the dropouts are still there and the same way around.
Tried, earlier but couldn't find a big enough socket, but now I found one and they came off easy. Thanks for the help.:beer:
08-13-03, 09:49 AM
howd u take it off???\
I got my Stanley Professional 12 piece 3/8" drive socket set, took out the 3/4 socket, the extension, and the ratchet. Then I connected the extension to the ratchet, connected the socket to the extension slipped it over the nut and in about 5 min all 4 pegs were off. Pretty easy, you should be able to do it no problem.
08-14-03, 03:47 PM
is there a nut IN the peg??? Cause i looked in mine and there wasnt anything
Yes there should be a nut or bolt inside the peg, at least it was on my model bike. Maybe there is a different way to do it on your model bike.:confused:
08-30-03, 09:35 PM
some pegs are just screw on
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.