aeroman
08-01-03, 05:57 AM
Has anybody out there with a powder coated steel frame experienced cracking in the powder coat due to frame flex? The guy who is sandblasting my frame said to be aware that that could happen.
Thanks
Thanks
Singlespeed & Fixed Gear - powder coat cracking
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.View Full Version : powder coat cracking
streetdog
08-01-03, 02:26 PM
No. Powder coats tend to be very durable. Check out this link to the FAQ's page at Spectrum Powder Works in Colorado Springs it should answer your questions and alay your fears. These folks do some of the best porder coating out there, full custom graphics are available integral with the powder coat. I am sending my bike there for a repaint later this year.
http://www.spectrumpowderworks.com/spwfaq.htm#faq1
http://www.spectrumpowderworks.com/spwfaq.htm#faq1
aeroman
08-02-03, 07:43 AM
Thanks, Streetdog. That was the info I was looking for.