Singlespeed & Fixed Gear - hub request

Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.



PDA

View Full Version : hub request

MattFashion
09-08-07, 11:06 PM
does anyone know of an affordable 28h rear track hub, preferably flip-flop.
i have an unused road wheelset i want to lace over.
thanks!

el twe
09-09-07, 12:08 AM
A friend of mine has Formulas in 28H.
MattFashion
09-09-07, 12:14 AM
will he sell them? haha
i'll have to check the QBP catalog tomorrow, but i'm almost positive they dont sell 28h. at least according to formula's hub website.

Tapeworm21
09-09-07, 12:45 AM
I'll check QBP now! HAHA!


http://online.qbp.com/6SPsvm45/prodl/HU1803.jpg

Bout $64. Info:

Pista/Track

* High flanged
* Uses standard track cogs (1.37" x 24 tpi) but requires a 1.32" x 24 tpi lockring, included with hub
* Light weight alloy body with brushed anodized finish
* Sealed bearing mechanism
* Chrome plated axle nuts


Hub Drilling: 28 spokes
Hub/Brake Compatibility: Rim Brake
Rear Axle Type: 10x1
Color: Silver
Cassette Body Type: Threaded, Track
Rear Hub Spacing: 120 mm
Intended Use: Track
Rear Wheel Type: Track
Skewer Incuded: Bolt-On
Weight: 280.0 g
Non-Drive Side Center to Flange: 44.0 mm
Drive Side Center to Flange: 31.0 mm
Non-Drive Side Flange Diameter: 60.0 mm
Drive Side Flange Diameter: 60.0 mm





Another Miche, little cheaper... around $55 or so:

http://online.qbp.com/6SPsvm45/prodl/HU1800.jpg

[IMG]Miche Pista/Track Hubs

Pista/Track

* High flanged
* Light weight alloy body with brushed anodized finish
* Sealed bearing mechanism
* Chrome plated axle nuts


Hub Drilling: 28 spokes
Front Axle Type: 9x1
Hub/Brake Compatibility: Rim Brake
Color: Silver
Front Hub Spacing: 100 mm
Intended Use: Track
Front Wheel Type: Track
Skewer Incuded: Bolt-On
Weight: 240.0 g
Non-Drive Side Center to Flange: 33.0 mm
Drive Side Center to Flange: 33.0 mm
Non-Drive Side Flange Diameter: 60.0 mm
Drive Side Flange Diameter: 60.0 mm


That's all that's on QBP.com. Best of luck to ya sir!
Ziemas
09-09-07, 12:50 AM
Miche makes one, although it's not flip-flop.

http://aebike.com/page.cfm?PageID=30&action=details&sku=HU1803
MattFashion
09-09-07, 12:52 AM
thank you gentlemen.much appreciated
Tapeworm21
09-09-07, 01:11 AM
I rechecked my work.... the first hub I posted is the only one for the rear. So that's your only option from QBP. It's fix cog only btw. There's many other vendors that bike shops have access to however. QBP kinda stinks for Track stuff.
MattFashion
09-09-07, 01:51 AM
it would be awesome if i could find something flipflop, but i suppose single sided will work.
its for a customer, and he'd demanding 28h front and rear.
oh well...
**** luck.
haha
filtersweep
09-09-07, 03:20 AM
I have a Nashbar(Joytech) in 28--- they were almost giving them away. I don't know if they still sell them.


it would be awesome if i could find something flipflop, but i suppose single sided will work.
its for a customer, and he'd demanding 28h front and rear.
oh well...
**** luck.
haha
Tapeworm21
09-09-07, 03:40 AM
I have a Nashbar(Joytech) in 28--- they were almost giving them away. I don't know if they still sell them.

Just throwing this out there.... I really f'ing doubt a LBS is gonna say "go check out Nashbar, they got some good deals!" It doesn't say it's for a customer till later in the thread, but again... just sayin. Support your LBS!
el twe
09-09-07, 11:46 AM
Well, maybe my friend lied about the Formulas...