Mountain Biking - stupid tires

Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.




View Full Version : stupid tires


Luken8r
08-07-03, 08:37 AM
i was trying to put on a Specialized Fatboy or Bigboy or whatever the hell its called on my front rim last night (Bontrager that came with my GF). After about a half an hour pulling and prying and a lot of swearing, i got the thing on, but wouldnt you know it, i pinched it flat when i went to pump it up. this tire is a 1.25" slick with a wire bead. same damn thing happened to me when i last tried to put it on...pinch flat :mad: :irritated does anyone have a good suggestion for a slick or maybe semislick with a kevlar bead? maybe it would be a good idea to go up to a 1.5 or 1.75 to get the damn thing on easier.


Aggressor
08-07-03, 08:40 AM
Tried any Michelin semi-slicks? Wildgripper City is a good tyre. I use it without fail, ever.

Luken8r
08-07-03, 08:50 AM
the only semi that ive used is my current set of some generic Topo+ Semi's that i got from nashbar or some other such place. the rear one is ok, but i wanted something a little better for the front. both these tires in front and back are kinda squirrely in turns.


Dannihilator
08-07-03, 08:57 AM
1.25's generally aren't a good idea to put on mtb rims.

Aggressor
08-07-03, 09:04 AM
Yeah, I agree. I use 1.5's and they are perfect.

Buzzbomb
08-07-03, 10:58 AM
Yeah but the width of the tire has nothing to do with how it goes on the rim, that is strictly a function of the bead diameter. After you mount the first bead of the tire onto the rim and insert the tube (make sure it's totally flat), make sure it's in the middle or low part of the rim. As you mount the other bead onto the tire, make sure they are more or less pinched together so they are in the center part of the rim. You should only have 6 or 8 inches left to mount before it starts to get tight, position the rim so that this is at the top. When you try to force this last bit over the rim, push down on the whole thing so that the bead of the tire is up inside the rim, this should give you enough slack to force that last bit on. Most of the time I can get tires on with just my hands, but sometimes you still need levers.

Luken8r
08-07-03, 11:49 AM
thank you captain obvious. i know how to change a tire, this one just sucks going on so i want a better one that isnt such a pain in the ass

Buzzbomb
08-07-03, 12:57 PM
Hey, sorry, didn't know you knew everything. After all, Captain Inept, you are the one who can't mount a tire without flatting the tube. :rolleyes:

Luken8r
08-07-03, 01:17 PM
whatever dude. im not going to get into an argument over how to change a tire. i asked for suggestions on a tire not your synopsis on how to be an a-hole

Buzzbomb
08-07-03, 01:30 PM
Originally posted by Luken8r
not your synopsis on how to be an a-hole

You are obviously very good at that already.:rolleyes:

Joe Gardner
08-07-03, 02:22 PM
I'm closing this thread, as it looks like the original question was answered.

Luken8r & Buzzbomb, please re-read our guidelines: http://www.bikeforums.net/misc.php?s=&action=faq&page=1#about

Harrassment... Harassment occurs when a member insults, attacks, and denigrates another member at any time. We have zero tolerance for taking an argument about a any topic to a personal level. For instance, the use of terms such as "idiot, moron, stupid" and other derogatory terms constitutes harassment. The idea is to make this a pleasant environment to discuss cycling, not a schoolyard, or name-calling and rock-throwing festival. Repeated critical and sharply negative posts toward a forum member can also constitute harassment.