Singlespeed & Fixed Gear - Well....It's done!

Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.




View Full Version : Well....It's done!


Yuppie
08-07-03, 11:47 PM
I've been reading about the progress others have made. I'm very impressed with how easy it was to actually throw the bike together.

Like others have said though, f@ck the paint job. I wasted a good week trying to make it look good, but the paint didn't dry hard and it scrapes off with a finger nail. Next time, I'm just going to strip the original paint and clear coat the frame.

I have a small issue still though. That is, the bottom bracket seems to jiggle. I think the frame threads were actually stripped a little when either taking off the BB housing or putting it back on. Needless to say, it's a little crooked and there is some play. Any way to fix this?

If nothing else, I'll just go find another frame at a thrift shop and put the whole thing back together. It'll get easier as I do this more eh?

It was a blast to ride today and I'll do more tomorrow. I'd post pictures, but I don't have a digital camera.


OneTinSloth
08-08-03, 02:20 AM
is the BB a cartridge style? or cup and ball? if it's cup and ball, you may just have to adjust it properly.

welcome to the dark side.

dumpstervegan
08-08-03, 06:19 AM
Congrats! Luckily for you, the paint-job isn't the most important part of the bike. Take mine for instance! Ha ha.

Far as the bottom bracket goes, I'd take it to a shop if you don't have the tools and have them either tighten it or replace it. Nothing worse than a loose BB. You lose so SO much power when they aren't properly tightened.