Bicycle Mechanics - will it work? all campy 10spd with a 10spd shimano cassette
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
10-03-07, 04:02 PM
i am building up a bike and I only have one set of wheels with shimano hubs. i already have a full 10speed chorus group but i was wondering if i can use a 10 speed ultegra or 105 cassette on my shimano hub with the chorus drivetrain.
Yes. You should install a Jtek Shiftmate pulley device in your rear derailleur cable. The combination of Campagnolo Chorus 10-speed shifters and derailleurs and Shimano cassettes and hub work fine with the Shiftmate.
10-03-07, 04:37 PM
A Shiftmate will work well. The other option is to use an American Classic or IRD conversion cassette instead of a Shimano cassette.
10-03-07, 07:32 PM
The other option is to use an American Classic or IRD conversion cassette instead of a Shimano cassette.
Except the Shiftmate is a low cost, reliable fix and Shimano and Campy OEM cassettes are better than the aftermarket will-fit brands.
What make of wheels do you have? Some mfg's have different cassette hub bodies available. You might be able to swap out the Shimano for a Campy and use a Campy cassette.
Shiftmate is an elegant and inexpensive solution for your problem. Genuine Campy cassette and chain would be the best solution though. Good luck on the bike.
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.