[volpi]

Finally it is arrived : all black , really a great look. But there is a problem! It is not possible to attach correctly the disc caliper on front fork probably because the tabs on the front fork are not welded in the right alligment. So the man at the bike shop has ordered at Cannondale Europe in Holland a new fork.I hope to solve the problem.
Have you never had a problem like this ?

[The BikeForums Team]

This is an archived thread, you can find the full version of this thread, with images, links and more content here.

Ready to buy? Check out these two online bike stores:
- http://www.nashbar.com (you can find the latest bike nashbar coupons in this thread)
- http://www.performancebike.com (you can find the latest performance bike coupons in this thread)

Cya on the forums,
- The BikeForums Team
- http://www.bikeforums.net

[Peak Team]

Finally it is arrived : all black , really a great look. But there is a problem! It is not possible to attach correctly the disc caliper on front fork probably because the tabs on the front fork are not welded in the right alligment. So the man at the bike shop has ordered at Cannondale Europe in Holland a new fork.I hope to solve the problem.
Have you never had a problem like this ?

Our Orbit tandem needed a 185 mm disc rotor on the rear for the same reason. The stock 160, 180 or 205 mm discs wouldn't fit when we upgraded from a cheap cable brake to a Hope Mono M4. Works fine with the 185 mm rotor.