Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.ridethecliche
10-27-07, 05:56 PM
Hey guys!
I've been trying to get my Rear derailleur on my cannondale to work like it should and I'm having way too much trouble.
I've consulted a book that I have as well as the park tool website only to be slightly more confused.
My questions are as follows:
I have a 10 speed setup and my chain hesitates between gears (ie, I need to go more than one shift to go up from smallest to next larger cog).
Also, I forget how to lower the tension of the cable so that I can move the housing off to lube the cables and to see what the pull of the RD is and to check my limit screw adjustments.
Also, what exactly does the b-screw do? I was messing with that and I didn't see either of the pulleys move.
Thanks for all your help!
I've been trying to get my Rear derailleur on my cannondale to work like it should and I'm having way too much trouble.
I've consulted a book that I have as well as the park tool website only to be slightly more confused.
My questions are as follows:
I have a 10 speed setup and my chain hesitates between gears (ie, I need to go more than one shift to go up from smallest to next larger cog).
Also, I forget how to lower the tension of the cable so that I can move the housing off to lube the cables and to see what the pull of the RD is and to check my limit screw adjustments.
Also, what exactly does the b-screw do? I was messing with that and I didn't see either of the pulleys move.
Thanks for all your help!