Cyclocross - 42t 110bcd ring?

anyone know where i can find a good 42t 110bcd chainring? its for a single up front.

thanks

Sugino and Salsa both make them, I've bought them at www.excelsports.com

I have a Salsa ring with the Salsa guard and a 3rh Eye chain watcher to help me from dropping chains.

This isn't working quite as well as I would like though, so we might be ordering a different type of chain watcher.

Let me know if you guys run into the same problem.

Also, DON'T buy a Surly ring, it won't work on the shop owner's 10 speed Sram chain. I don't think its 1/8", but for some reason it didn't fit.

As HuckMeat said, Salsa or Sugino.

With a 10-speed rear, I use a Sugino 42t/110bcd with a Salsa Crossing Guard and an N-gear Jump Stop. So far so good. Over the weekend I had my first derailment during a run-up, the chain popped right back in when I started pedaling.

I should have added more before, I usually run a 44/110 salsa ring without problems, using a 3rd eye. However, for some really muddy races I switched to the 42 from sugino, and they are a lot lighter than the salsa rings. No problems using an outer guard and a 3rd eye with either.

TA or Stronglight :)

I am running a 42 tooth Rocket Ring with 135/110 bcd combo (you can run it on either). $18 at the lbs.

I am running a 42 tooth Rocket Ring with 135/110 bcd combo (you can run it on either). $18 at the lbs.

are you running a 9sp rear with a 9sp chain with that ring?

are you running a 9sp rear with a 9sp chain with that ring?I use a rocket ring with 9-speed chain on my fixed/SS, it works fine.

Sugino makes a 42 teeth chain ring for 110 BCD. Best price is here $20.00:

http://www.bikemannetwork.com/Merchant2/merchant.mvc?

:D

TA all the way.