Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.evblazer
11-05-07, 11:02 AM
On my dinotte tail light 4AA there are just 4 modes. Low, Medium, High, 5Flash-Pause.
In the manual and a few other posts I have see noted that there should be 2 different sets of modes (flashing or steady) which are changed by holding the button for 6 seconds then turning on with two clicks.
Well mine turns on when I just tap the button no two clicks needed so when I hold it for 6 seconds it really does nothing but turn it on then off when I let go. I'd really love a High-Low strobing during the day is there seperate directions for the old and/or orphaned version of the light that I seem to have?
In the manual and a few other posts I have see noted that there should be 2 different sets of modes (flashing or steady) which are changed by holding the button for 6 seconds then turning on with two clicks.
Well mine turns on when I just tap the button no two clicks needed so when I hold it for 6 seconds it really does nothing but turn it on then off when I let go. I'd really love a High-Low strobing during the day is there seperate directions for the old and/or orphaned version of the light that I seem to have?