hotbike
12-03-07, 02:01 PM
http://i134.photobucket.com/albums/q119/hotbike/photo_0008.jpg
This shows how the fiberglass box/fairing is mounted. I used 1"x4" polyethylene barstock to make the mounting bracket.
This was also posted under "recumbent".
http://i134.photobucket.com/albums/q119/hotbike/photo_0006.jpg
Very shiny because I sprinkled aluminum powder between coats of paint.
http://i134.photobucket.com/albums/q119/hotbike/photo005.jpg
This is a photo I took a few months back.
http://i134.photobucket.com/albums/q119/hotbike/00000024-1.jpg
This bike was developed at the same time as the other one, but I molded the fiberglass directly to the frame, so it cannot be unbolted. This is the bike appearing in my avatar. Both these bike fairings are based on diesel truck spoilers.
This shows how the fiberglass box/fairing is mounted. I used 1"x4" polyethylene barstock to make the mounting bracket.
This was also posted under "recumbent".
http://i134.photobucket.com/albums/q119/hotbike/photo_0006.jpg
Very shiny because I sprinkled aluminum powder between coats of paint.
http://i134.photobucket.com/albums/q119/hotbike/photo005.jpg
This is a photo I took a few months back.
http://i134.photobucket.com/albums/q119/hotbike/00000024-1.jpg
This bike was developed at the same time as the other one, but I molded the fiberglass directly to the frame, so it cannot be unbolted. This is the bike appearing in my avatar. Both these bike fairings are based on diesel truck spoilers.