Tandem Cycling - where to find front crankset for late 70s Schwinn Tandem

Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.




teachndad
12-28-07, 07:14 AM
Hi,

I recently bought a late 70s Schwinn Twin Sport Tandem. The only problem is that on the right side on the front crankset, there is a problem with the pedal. The pedal feels like it oscilates up and down as you ride it. It's the same feeling you get when you ride a bicycle with a bent crank.

I don't think the problem is the crank, it's how the pedal threads into the crank. The pedal doesn't sit square to the crank. It's out at an angle. I took out the pedal and gingerly threaded it back in. Still the same problem. I think someone had cross threaded the pedal into the crank threads at some point.

Is there a fix for this? I might consider replacing the crankset, but I don't know how easy it would be to find a replacement or where to even start.

Thanks

Rod Wylie


JanMM
12-28-07, 08:07 AM
I've read about but have no experience with HeliCoil inserts as a fix for stripped threads. A larger hole would be drilled, then the HeliCoil inserted, then the pedal screwed into that. Are the pedal threads OK?

TandemGeek
12-28-07, 09:22 AM
Definitely a Helicoil: drill out the old threads, tap the hole with the new oversized threads for the Helicoil insert, thread-in the Helicoil with a little Loctite, and then thread in your pedal: you're done.

If you haven't done it yourself and don't have a drill press or the other tools needed to tap the hole, you would want to have a local machine shop do it for you. It takes about 10 minutes and some of the better bike shops can do it. The concern with your average bike shop is, most are accustomed to working with soft alloy cranks or frame materials, etc..., not the harder steel that may have been used to make your cranks.


teachndad
12-28-07, 11:48 AM
Okay, the helicoil looks like something to investigate. I did forget to mention that this is a 10 speed with aluminum cranks. So, maybe that might make it easier to find a shop, since TandemGeek mentioned that familiarity with aluminum might be helpful.

pastorbobnlnh
12-29-07, 02:57 PM
Rod,

Do your cranksets look like these on my '79 Twinn Sport?

http://i125.photobucket.com/albums/p71/pastorbobnlnh/Twinn%20Sport/P1010014.jpg

I might have a replacement that will solve your problem.