Singlespeed & Fixed Gear - Questions about running a freewheel on a fixed/fixed low flange Dura Ace hub
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
Edited post: Thanks for the replies. Cannot use a freewheel with this particular hub.
12-28-07, 10:46 PM
And are there any thin spacers/shims that could be used to increase clearance between the flange/spokes and the freewheel body?
Careful there ... you're already working with less threads than usual. Don't push your luck too far.
12-28-07, 11:21 PM
hmmm...i have a friend who's done this and says it's a-okay. then again, he also rides no brakes/platform pedals and says "oh yeah, it's fine, i've done this for a few years"...but he's also been hit a lot.
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.