bfong
09-14-03, 08:23 PM
I have a Merlin with a couple of small scratches and was wondering how to get them out. I know to use steel wool, but do not know the procedure.
Thanks,
Bill F.
Thanks,
Bill F.
Road Cycling - Finishing Ti frames
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.View Full Version : Finishing Ti frames
BikerRyan
09-14-03, 09:49 PM
I use green Scotch brite pads on mine. Try to stay with the grain which usually means perpindicular to the tube. Just lightly rub the scratches out.
-Ryan
-Ryan
dwatson
09-15-03, 04:11 PM
If the frame is clear coated I would use an Auto buffing compound. If the frame is raw some 800+ wet dry sandpaper would be better.
Dave
Dave