Bicycle Mechanics - Mountain bike cassete on road weels
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
Will a mountain bike cassete fit in a shimano 550 road weels?
Mountain bike components are much easyer to find here. I also would like to have more than the 23 road cassete I have in the old road bike I am rebuilding. Crank is 39/52.
Should I use a mountain bike rear derailleurs or should I use the Tiagra short cage I was planing?
Thank you for any help.
01-12-08, 01:40 PM
Yes, it will work. You'll need a mountain bike rear derailleur because the largest cog will likely be too large for the road derailleur to work without the upper pulley bumping into the large cog. Combined with your front gearing, either the GS or SGS mountain derailleurs should work. The SGS models have the longest cage, but since you're running a double crank, the GS models should work fine also. You'll also need a longer chain so it's long enough to cover the big ring/large cog combination (plus one inch)-
Thank you for the quick information.
01-12-08, 01:58 PM
You should be able to easily go up to a 27T cog without having to change the RDER. Maybe 29-30??
01-12-08, 04:42 PM
If you use a mountain bike cassette (32 tooth and up) you will need a mountain bike rear derailleur. I have done it to 2 bikes, a Surly Cross Check that I use for some light trail riding and a friend of mine's Cannondale. In both cases I replaced the Tiagra rear with a Deore rear, because of the pulley bumping well biked described. BTW both bikes shift as well with the Deore as they did before.
Powered by vBulletin® Version 4.1.12 Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.