seitenryu
01-15-08, 01:37 PM
I'd like to use standard 26.0mm bullhorns with my NJS(25.4) stem. Where would I locate a 26.0 reamer? Is there another option besides an Ergostem or bars with more drop? Sam
Bicycle Mechanics - Nitto NJS stem w/bullhorns
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.View Full Version : Nitto NJS stem w/bullhorns
roadfix
01-15-08, 01:41 PM
I muscled my Syntace bullhorns into my Nitto track stem. Still holding up after 3 years.
Slavic
01-15-08, 01:46 PM
Take it to a machine shop and ask them if they could do it, for starters?
If not, you could probably patiently file it out.
If not, you could probably patiently file it out.
LWaB
01-15-08, 02:29 PM
There are adjustable reamers.
seely
01-15-08, 02:32 PM
You should be able to get some 26.0's in there without too much effort if you spread the clamp a bit. A great trick for this is to take the bolt out, put a penny over the inside bolt hole and thread the bolt in. It will hit the penny and expand the clamp. If your stem is not threaded on the outside of the clamp, most bolts with thread in from the backside as well. Just reverse the above.