euphoria
01-15-08, 06:51 PM
I've run into a snag with my latest road build and I need to know whether I can galvanize the front derailleur off the Moto. I would just take it off but I don't want to mess up the alignment if it isn't a 34.9 clamp.
Cyclocross - Fantom Cross Pro owners...FD clamp size?
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.View Full Version : Fantom Cross Pro owners...FD clamp size?
justinb
01-15-08, 09:56 PM
My Fantom Cross (not Pro) uses a 31.8 clamp.
MIN
01-15-08, 11:39 PM
If seatpost is 27.2 the outer seat tube diameter is generally 31.8mm.
euphoria
01-16-08, 12:10 PM
If seatpost is 27.2 the outer seat tube diameter is generally 31.8mm.
the CAAD9 is a fickle mistress, then.
the CAAD9 is a fickle mistress, then.
~stella
01-16-08, 12:31 PM
If seatpost is 27.2 the outer seat tube diameter is generally 31.8mm.
This is true for most aluminum frames which usually have over-sized tubing. Most steel frames however, use 28.6 braze on adapters. The third "standard" is 35.0mm which a lot of carbon frames use.
This is true for most aluminum frames which usually have over-sized tubing. Most steel frames however, use 28.6 braze on adapters. The third "standard" is 35.0mm which a lot of carbon frames use.
MIN
01-16-08, 12:33 PM
While we are on the subject, my steel Lemond Poprad (2007) is a 31.8mm ST diameter with a 27.2mm seatpost.