Bicycle Mechanics - Park truing stand parts

Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.



PDA

View Full Version : Park truing stand parts

rodri9o
01-17-08, 04:46 AM
My park TS-2 has a broken knob...its the knob that adjusts the width of the legs from side to side.
Anyone know if there are parts available for these things???

would quality have this stuff? :o

Bobby Lex
01-17-08, 05:17 AM
Schematic link below together with part number for the knob. Contact Park Tool for info on how to get a new one (direct from Park Tool, or from a dealer):

http://www.parktool.com/products/documents/TS-2_instructions_2007524_81286.pdf

Bob
Soil_Sampler
01-17-08, 05:37 AM
http://www.biketoolsetc.com/index.cgi?id=611473463619&c=Tools&sc=Wheel-and-Rim&tc=Truing-Stand-Parts

http://aebike.com/page.cfm?PageID=30&action=list&Category=348&Brand=291&type=T

cascade168
01-17-08, 06:35 AM
My park TS-2 has a broken knob...its the knob that adjusts the width of the legs from side to side.
Anyone know if there are parts available for these things???

would quality have this stuff? :o

Virtually all parts for TS-2's are available from any LBS. QBP stocks all the parts and any LBS should be able to have the part in your hand in just a few days.

BTW, that knob is the most common thing to break. The reason is that people try to tighten it way too much. There is no need for that. Getting it super tight does nothing for you (except to cause the knob to break prematurely).
rodri9o
01-17-08, 06:41 PM
thank you all for your replies...some great info on here.
my 'knob' broke from the stand falling down, unfortunately. seems the knob was the only damage. it will be re-calibrated for center though.