Singlespeed & Fixed Gear - OnGuard Lock Identity Crisis
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
I purchased an OnGuard lock yesterday from Sunrise Cyclery, who were fantastic do deal with. The lock, however, seems to have a bit of an identity crisis -- it's labeled as both a Pitbull and a Bulldog. I plan to take off the plastic guard and create what Sunrise advertises as a "Bulldog Mini Thin Crossbar," the lock that many have found for cheap through Amazon.
01-23-08, 06:38 PM
I have the lock in that picture, and I'm not sure you can take off the plastic. Maybe the middle silver part, but that's probably less than 1/8" thick and works as a keyhole cover, which is worth having around in sketchy weather.
I was able to take it off (per http://www.bikeforums.net/showthread.php?t=345418), however mine is bare metal underneath. I have covered it with electrical tape for the time being, but I'll likely create a more permanent solution out of PVC. Now that I know, it would have been much easier to get the "thin crossbar" version available on Amazon.
01-23-08, 08:17 PM
I dropped my lock in a drunken stupor and the plasic casing cracked off. it's ugly bear metal underneath. I wrapped mine in electrical tape.
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.