Track Cycling - regluing a Mavic G3 rear wheel

Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.



PDA

View Full Version : regluing a Mavic G3 rear wheel

paulv
01-28-08, 05:26 PM
Hi

Does someone know if it is easy/relatively common to have to reglue the body of a Mavic wheel?

And also how easy it is to convert this wheel from freewheel to fixed? (or to a front wheel?)

Thanks!!

paulv
01-28-08, 05:52 PM
PS: wondering... maybe this is a question I should cross-post in the road subforum?
thiskidgotmoxie
01-28-08, 06:14 PM
Are you talking about gluing a broken carbon wheel? I wouldn't do it, if I was you.

paulv
01-28-08, 06:29 PM
Are you talking about gluing a broken carbon wheel? I wouldn't do it, if I was you.

No, no, sorry I explained it wrong, I edited out the reference to the Mavic disc of David Millar in my post because it was confusing - in his case, the rim separated from the carbon. Here, the structure of the carbon is intact, but aluminum body somehow spins (if you pedalled, you would go nowhere...) and would need to be glued (or something?)

I seem to remember reading about this being somewhat common, and fixable, with Mavic wheels, but could not find the info online now that I searched for it.

Ditto about replacing the axle or body (or whatever would need to be replaced) to use this road wheel on the track.
goldenskeletons
01-30-08, 01:59 AM
hey paulie.

this sounds kinda similar to the problem folks were having with the aerospoke rear hubs where it would develop play between the alu hub and the carbon (graphite?) body. apparently aerospoke's solution was to JB weld them. i dunno what they do on current models, but that's not relevant here.

i guess you could try JB weld, but it sounds to me like your hub body could suddenly turn weirdly freewheel on you.
Yoshi
01-30-08, 08:59 AM
hey paulie.

this sounds kinda similar to the problem folks were having with the aerospoke rear hubs where it would develop play between the alu hub and the carbon (graphite?) body. apparently aerospoke's solution was to JB weld them. i dunno what they do on current models, but that's not relevant here.

i guess you could try JB weld, but it sounds to me like your hub body could suddenly turn weirdly freewheel on you.

Nah, this sounds pretty different from the aerospoke problem. The aerospokes were developing play because of wear on the composite at the hub interface.

This just sounds like whatever method attached the rim failed.

All that said, I really don't know of any solution, sorry.