Mountain Biking - List MTB front hubs without quick release

Dear all',

I am looking for a MTB front hubs with discbrake but I found that most of them have quick release. Is there any hubs out there without QR??

Thanks in adv,
Dubbo.

So what are you looking for? Thru-axle? Bolt up? Dont be vague.

Look at hadley, dice, shimano the list goes on. All companies make them pretty much. What kind of riding are you doing?

So what are you looking for? Thru-axle? Bolt up? Dont be vague.

Look at hadley, dice, shimano the list goes on. All companies make them pretty much. What kind of riding are you doing?

I am actually building up a MTB fixed gear, soo I need something with solid axle??
I already have cogs that matchs to discbrake BCD and just need to look for hubs without the quick realese and use solidaxle/nuts.

Sorry I didnt clarify much...

Cheers,
Dubbo.

I am actually building up a MTB fixed gear, soo I need something with solid axle??
I already have cogs that matchs to discbrake BCD and just need to look for hubs without the quick realese and use solidaxle/nuts.

Sorry I didnt clarify much...

Cheers,
Dubbo.

Why would you need a solid axle for the front hub? Any front hub will do, and you can use hex key skewers if you don't want a QR.

Why would you need a solid axle for the front hub? Any front hub will do, and you can use hex key skewers if you don't want a QR.

Because I need to respace the hubs from 100mm to 120mm as a rear hubs...Its better that way cause I can achieve prefect chain-line.

http://www.fixedgeargallery.com/articles/tomchow/dischub/

Because I need to respace the hubs from 100mm to 120mm as a rear hubs...Its better that way cause I can achieve prefect chain-line.

http://www.fixedgeargallery.com/articles/tomchow/dischub/

It would be much easier and cheaper to just swap out the hollow axle for a solid one. Are you trying to save money with this project or just tinker around?

It would be much easier and cheaper to just swap out the hollow axle for a solid one. Are you trying to save money with this project or just tinker around?

Save some money ... swapping axle, is it hard to find a 10mm rear solid axle tho? I really have no idea about MTB since I been riding fixed for 3 years plus I have no axle problem as yet *touch wood*.

I guess I shall just find a Shimano front wheel and f@4k around with it.

Save some money ... swapping axle, is it hard to find a 10mm rear solid axle tho? I really have no idea about MTB since I been riding fixed for 3 years plus I have no axle problem as yet *touch wood*.

I guess I shall just find a Shimano front wheel and f@4k around with it.

a 10mm solid axle shouldn't be hard to find at all, although with all the inexpensive and decent quality SS and fixed hubs on the market I question if you'll really save any money on this project.......

a 10mm solid axle shouldn't be hard to find at all, although with all the inexpensive and decent quality SS and fixed hubs on the market I question if you'll really save any money on this project.......

Oh this project is not really about saving load of money...its more like I can use a 6 shooters cog and low gear ratio. =) thanks for the help tho.

Out of curiosity, what frame are you basing this on? I've never heard of a 120mm spaced MTB, only old road bikes and track bikes.

Out of curiosity, what frame are you basing this on? I've never heard of a 120mm spaced MTB, only old road bikes and track bikes.

Oh crap I mean 126mm frame... It's an really old GT MTB frame with horizontal dropout.