Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.Roam
02-13-08, 04:21 PM
My rim wall blew out this morning and I figured it would be a good opportunity to pull apart the hub before rebuilding the wheel.
Will a thin coat of Phil's all around do, or should I really goop it up, bearing (pun unintended) in mind that it's a Vancouver work bike that sees some pretty horrific grime. How heavy should I go on the pawls?
Branford Bike diagram for reference:
http://www.branfordbike.com/images/hub/road_pr3.jpg
What components should be greased, and how liberally?
Will a thin coat of Phil's all around do, or should I really goop it up, bearing (pun unintended) in mind that it's a Vancouver work bike that sees some pretty horrific grime. How heavy should I go on the pawls?
Branford Bike diagram for reference:
http://www.branfordbike.com/images/hub/road_pr3.jpg
What components should be greased, and how liberally?