dangydang
03-10-08, 01:36 PM
Does anyone know the diamater of Nitto RB-018 bullhorns outside of the clamp area? Trying to figure out if my cross lever with a 25.4mm clamp will work with these.
Singlespeed & Fixed Gear - Nitto RB-018 bullhorns - diameter outside of clamp area?
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.View Full Version : Nitto RB-018 bullhorns - diameter outside of clamp area?
gehrkead
03-10-08, 01:56 PM
its 24.0mm
dangydang
03-10-08, 02:20 PM
Thanks!
MIN
03-10-08, 02:37 PM
Beer can shim works fine for <2-3 mm difference. Preferably Pabst.
mander
03-10-08, 02:48 PM
Ill just sneak in an ot now that op's question is answered: Is there a "correct" way to mount crosstops on nitto drop bars? For whatever reason, are you supposed to put them on the raised ~26mm central thing, or off to the sides on the 24mm area, or what?
MIN
03-10-08, 02:52 PM
Ill just sneak in an ot now that op's question is answered: Is there a "correct" way to mount crosstops on nitto drop bars? For whatever reason, are you supposed to put them on the raised ~26mm central thing, or off to the sides on the 24mm area, or what?
Off to the side is how I did it (on my RB021)
http://i40.photobucket.com/albums/e211/gbae007/nitto.jpg
Off to the side is how I did it (on my RB021)
http://i40.photobucket.com/albums/e211/gbae007/nitto.jpg
mander
03-10-08, 02:55 PM
Cool, thanks MIN. I'll do it that way too. Itd be a shame to cover up that nice engraving.