[lordconqueror]

My Scattante frame has brazeons to run the front derailleur cable from the top tube to the seat tube, around a pulley and then up to the derailleur. I am running Campy, so in addition to not having a frame mounted cable adjuster, I don't have an STI mounted one either.

Now, I have a couple in line adjusters from some Avid BB7 road brakes, could I use this somewhere in my front derailleur setup to take the slack out of the cable, or do I need to buy a different one, like the ones listed here? http://www.universalcycles.com/shopping/index.php?category=1613 (here)

[The BikeForums Team]

This is an archived thread, you can find the full version of this thread, with images, links and more content here.

Ready to buy? Check out these two online bike stores:
- http://www.nashbar.com (you can find the latest bike nashbar coupons in this thread)
- http://www.performancebike.com (you can find the latest performance bike coupons in this thread)

Cya on the forums,
- The BikeForums Team
- http://www.bikeforums.net

[pinkrobe]

You should be able to use the adjusters inline with the housing. I would put them up by the handlebar for easy access while riding.