vik
03-13-08, 10:03 AM
http://bp1.blogger.com/_vUEhS0lU3eU/R9lOUWpBdBI/AAAAAAAAEkM/n7O7YR1mD7U/s400/bd+front+%26+rear+fenders+sm.JPG
I mounted some Planet Bike Cascadia ATB fenders (http://ecom1.planetbike.com/7027_5.html) on my Big Dummy last night. They look great and fit the 2" Marathon XRs well.
http://bp0.blogger.com/_vUEhS0lU3eU/R9lOYGpBdEI/AAAAAAAAEkk/5Mqd_z1uBnI/s400/BD+rear+fender+sm.JPG
The rear went on easily without any modifications and fits the BD frame perfectly. The fender struts are touching the BD frame so I'll put some electrical tape there to keep them from rubbing through the paint.
http://bp1.blogger.com/_vUEhS0lU3eU/R9lOWWpBdDI/AAAAAAAAEkc/rctmkDcLwM8/s400/BD+front+fender+sm.JPG
I mounted the front fender to the mid-fork braze ons - avoiding the disc brake caliper entirely. However, PB provides hardware to get you around the caliper if you want to use the lower mounts.
http://bp1.blogger.com/_vUEhS0lU3eU/R9lOVWpBdCI/AAAAAAAAEkU/mRoXN_sO1pg/s400/BD+front+fender+bracket+detail+sm.JPG
One issue I ran into is the massive amount of clearance in the BD fork means that if you mount the fender to the fork crown as you usually would you end up with a huge gap between the fender and the tire. It looked goofy so I made a small bracket from a scrap of metal to lower the fender closer to the tire.
I mounted some Planet Bike Cascadia ATB fenders (http://ecom1.planetbike.com/7027_5.html) on my Big Dummy last night. They look great and fit the 2" Marathon XRs well.
http://bp0.blogger.com/_vUEhS0lU3eU/R9lOYGpBdEI/AAAAAAAAEkk/5Mqd_z1uBnI/s400/BD+rear+fender+sm.JPG
The rear went on easily without any modifications and fits the BD frame perfectly. The fender struts are touching the BD frame so I'll put some electrical tape there to keep them from rubbing through the paint.
http://bp1.blogger.com/_vUEhS0lU3eU/R9lOWWpBdDI/AAAAAAAAEkc/rctmkDcLwM8/s400/BD+front+fender+sm.JPG
I mounted the front fender to the mid-fork braze ons - avoiding the disc brake caliper entirely. However, PB provides hardware to get you around the caliper if you want to use the lower mounts.
http://bp1.blogger.com/_vUEhS0lU3eU/R9lOVWpBdCI/AAAAAAAAEkU/mRoXN_sO1pg/s400/BD+front+fender+bracket+detail+sm.JPG
One issue I ran into is the massive amount of clearance in the BD fork means that if you mount the fender to the fork crown as you usually would you end up with a huge gap between the fender and the tire. It looked goofy so I made a small bracket from a scrap of metal to lower the fender closer to the tire.
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.