nikos
10-23-03, 04:36 PM
I cant figure out the little clips that come on the pads. I can get the pads in, but I cant get them to stick onto each side, they just clip in and sit in the middle. How do I get them to attach to the caliper?
Bicycle Mechanics - Anyone install Aztec disc pads on Avid mechs?
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.View Full Version : Anyone install Aztec disc pads on Avid mechs?
MtnBikerChk
11-01-03, 04:19 PM
I cant figure out the little clips that come on the pads. I can get the pads in, but I cant get them to stick onto each side, they just clip in and sit in the middle. How do I get them to attach to the caliper?
We are having the same problem :(
We are having the same problem :(
dirtbikedude
11-01-03, 06:19 PM
STEP 6: INSTALL PADS & SPACER
Install the pads and spacer into the caliper and
turn the inboard adjuster knob clockwise to lock
into place.
Go here and check out page 14
Pad replacement (http://www.avidbike.com/7_techinfo/BBDB%20Overhaul%20Guide%20w-cover%20hi-res.pdf)
Install the pads and spacer into the caliper and
turn the inboard adjuster knob clockwise to lock
into place.
Go here and check out page 14
Pad replacement (http://www.avidbike.com/7_techinfo/BBDB%20Overhaul%20Guide%20w-cover%20hi-res.pdf)