Bicycle Mechanics - Campy Chainring Guard
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
03-25-08, 11:54 PM
I want to use a centaur triple crank (135 bcd) on my cross bike and I would like to go to a 2x10 setup using the inner and middle rings. Does someone make a chainring guard to put where the outer ring was - to take up the space? or should I use shorter bolts and no guard - let the FD keep the chain from falling off?
03-26-08, 08:03 AM
Any reason not to leave the outer ring in place as a "guard". It's probably no heavier than a replacement guard would be. Just set the fd's limit screws to prevent shifting into it.
Oterewise, just use the fd as a chain keeper and buy "single stack" chainring bolts.
03-26-08, 10:54 AM
Cyclo cross world has one :)
Powered by vBulletin® Version 4.1.12 Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.