Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.bikex10
04-04-08, 02:54 PM
I am thinking about upgrading our mountain tandem frame to a lighter one with a 145mm rear spacing. I would really like to continue to use the same wheels that we are now using which have a 135mm rear hub.
The question that I have is will I need to redish the wheel to keep it centered in the frame and make up the additional 10mm on the left with a axle spacer? The disc brake setup should not be a problem as I can turn a spacer on the lathe.
The question that I have is will I need to redish the wheel to keep it centered in the frame and make up the additional 10mm on the left with a axle spacer? The disc brake setup should not be a problem as I can turn a spacer on the lathe.