Touring - Building up an LHT from a Schwinn Woodlands. Reasonable?
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
I'm entertaining the idea of buying an LHT frame and building it up with some parts from an old Schwinn Woodlands bike I got when I was a teenager. Its got a bent front wheel but everything else should be in working order (I would need new wheels and tires anyways.) So my question is, with my limited bike building knowledge, will the components from the MB fit a considerably bigger LHT frame? Also, what kind of difficulty am I looking at to do such a build. I consider myself fairly mechanically inclined but I've done little bike work other than regular maintenance. Am I way out of my league here or is this a reasonable endeavor?
04-13-08, 10:17 PM
I bet most parts will not be compatible and you'll wind up having to have to buy a lot of parts.
Unless you're positive that nearly all parts will transfer -and- that they've still got some cycling life in them, you're better off buying a Complete LHT.
I built my LHT from parts stripped from a bike I had laying around and spent a lot more than I thought I would.
It's hard to tell, possibly, possibly and probably not.
You need a new wheelset -you'll probably have to relace the existing rear hub (you probably won't be able to get a wheelset with the freewheel hub new now) to keep the original shifters -that's not cheap in itself unless you do it yourself, plus you say you need new tyres. What about the front derailleur? Is is the right size? The bb width? What about the headset? Do the brakes fit? (can't remember if the LHT only offers canti post studs). What about the seatpost diameter? BB cable guide? New cables? (all the little things add up).
Another thing to consider, from your post, it sounds like you don't have all the tools necessary; add on some money for those, and again, these tools add up. All things being said, unless you're in love with those bike parts, and unless you really want to invest money in tools knowing you're going to be using them enough in the future, I think you'd be better off trying to buy a built up LHT or used equivalent (certainly so as I'm assuming your current drivechain has some wear associated with it?).
The good news is that if you are mechanically inclined, I think you could do all the work yourself. But: though you might be able to scrape in below the $900 cost of a new built up LHT -probably less than a couple of hundred dollars, maybe less than $100 total savings depending on which new components you still need to buy -I think it might be a penny wise but pound foolish solution.
edit: I assumed the Schwinn Woodlands had a freewheel -when the poster said they got it when they were a teenager, I assumed quite some years ago!
04-14-08, 11:36 AM
Yes, many of the components from the Schwinn Woodlands will fit, but some probably won't (.g., headset, stem). I just viewed a Schwinn Woodlands on-line and noted that it appears to have lower-level components, such as Shimano GS200 dérailleurs and shifters. If money is not an issue, I recommend fitting better components, such as Shimano Deore or LX, on the LHT, or, like the other posters have noted, buying the complete LHT or other touring bike.
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.