Singlespeed & Fixed Gear - Question about chainring

Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
SuperMario5459
04-23-08, 03:28 PM
I live in a fairly hilly area and I was wondering if 46/17 is a good chainring/cog ratio for such terrain? Obviously feel/comfort is a factor but I'm more worried about being able to get up hills rather than a high turnover rate (which I prefer actually). Specifically, I'm talking about IRO bikes if that makes a difference weight-wise or component-wise.
i am running a 48/16 in a fairly flat area and it is hard on my body. i had to deal with a nasty headwind yesterday and i nearly puked...i shaved my head last night after not cutting my hair for a year hoping that will help my aerodynamics. if you have some ugly hills consider a 44 - that is what i a going to try once summer gets here.
SuperMario5459
04-23-08, 03:45 PM
Wish I could.. unfortunately they only come with 46's. Would a 17/18t cog work better?
roadfix
04-23-08, 03:48 PM
46 is a good ring size for the street. As far as recommending a gear ratio, only you can determine that as we have no idea what your fitness level is.
A given gear ratio may be fine for one guy but might not be suitable for another who may not as fit.
That said, about 70 gear inches is a good starting point to determine if you want to go higher or lower.
Hobartlemagne
04-23-08, 03:55 PM
Look at Sheldon Brown's gear inch calculator:
http://sheldonbrown.com/gears/
Search for a few previous threads on the forum regarding gear inches.
You'll see many people who will explain their home area riding terrain and their gear inches.
mine- 45/17 Some hills in my area- lots of long steady grades.
I_luv_hooters
04-23-08, 04:01 PM
I live in a fairly hilly area and I was wondering if 46/17 is a good chainring/cog ratio for such terrain? Obviously feel/comfort is a factor but I'm more worried about being able to get up hills rather than a high turnover rate (which I prefer actually). Specifically, I'm talking about IRO bikes if that makes a difference weight-wise or component-wise.
i've used that exact ratio on one of my bikes. it's perfect for hills. later i went to a 47 chainring, but its basically the same. you'll spin a lot on flats and downhill, but you will climb steep hills very fast.
My middle-aged relatively unfit (work and all) bod seems OK with 46/18 on the street. I wouldn't call the hills in my area nasty, but they are there.
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.