Electronics, Lighting, & Gadgets - Shimano Flight Deck SC-6502 setup issue

Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.



PDA
bike_boy
04-28-08, 05:56 PM
Ok, so my Flight Deck SC-6502 cyclocomputer has the ability to be programmed for multi bikes.
Problem is how do I select back to bike number, say, #1? As I somehow knocked to #3.
I can't seem to find how to do this via instructions.

bike_boy
04-28-08, 10:21 PM
Found it; I had missed it on instruction page due to fine or small print.
Per instructions, put the display on any screen other than clock 'CLK'.
Then hold B button for 5 seconds. Then pres A button to rotate thru the
4 bike number selections till I get to the one I want.
Camilo
05-16-08, 01:56 PM
Found it; I had missed it on instruction page due to fine or small print.
Per instructions, put the display on any screen other than clock 'CLK'.
Then hold B button for 5 seconds. Then pres A button to rotate thru the
4 bike number selections till I get to the one I want.

When you switch say, from Bike 1 to Bike 2, does the cumulative mileage (odometer) change, or do all the bikes add on to the same odometer? The reason I ask is that I have two sets of wheels with different size tires. It would be nice to program two "bikes" for the two tire sizes and switch between the two when I change wheels. But I'd like to keep the odometer accumulating total miles since I like to track that on an annual basis.