[Richbiker]

The head on my Zefal Husky floor pump won't hold an airtight seal between the pump head and a schrader valve or presta adapter anymore. The Zefal website says there's supposedly a replacement rubber ring available, or replacement head but I can't find anyone who sells those. So, I either need to find a compatible pump head or hose. Has anyone found a U.S. source for Zefal pump parts, or used/adapted a head or hose from another manufacturer's pump on a Zefal? Let me know.

Thanks,
Rich

[The BikeForums Team]

This is an archived thread, you can find the full version of this thread, with images, links and more content here.

Ready to buy? Check out these two online bike stores:
- http://www.nashbar.com (you can find the latest bike nashbar coupons in this thread)
- http://www.performancebike.com (you can find the latest performance bike coupons in this thread)

Cya on the forums,
- The BikeForums Team
- http://www.bikeforums.net

[BloomingCyclist]

I believe this place (XX Cycle) ships anywhere including the US - here's a link to the Zefal Husky parts page.
http://www.xxcycle.com/parts-pumps-foot,en.php
I have used the Topeak replacement head & hose which is more readily available on three different brands of floor pumps so it may do fine on your Zefal.

Bloomington, IN

[2manybikes]

Did you already tighten the outer ring a little bit that adjusts the diameter of the hole to make up for this common problem?

[mrfish]

When this happened on my speclialized pump I upgraded to a new head. I got a Blackburn head which fits presta and schraeder valves, which is handy on the rare occasions when it's needed. It screwed straight into the Specialized base, which would suggest that I was either lucky or manufacturers tend to use the same size for hose attachments.